Advanced Wireless Communications MINI PRO Guide de l'utilisateur télécharger pdf (Page 23)

the access point and the registrar.

15. If you want to save these settings to a profile for future use by a legacy client, click Save wireless

settings. The profile settings are saved to a text file (txt) on your local hard drive. The file is saved

to your local C:\ drive by default. Accept the default save location or click Browse to choose another

location on your computer.

Next, you can connect an enrollee (computer) to the network using the registrar.

Connect an Enrollee to a Network or Access Point

Perform these steps to connect an enrollee to the network you just created. This assumes that the registrar

computer is running the WiFi connection utility.

NOTE: To achieve transfer rates greater than 54 Mbps on 802.11n connections, WPA2-AES security must

be selected. No security (None) can be selected to enable network setup and troubleshooting.

1. At the enrollee you want to connect the network, a message tells you that one or more access points

with Wi-Fi Protected Setup capability is within range of your wireless computer. Click on this

message. (Or, you can select the network from the WiFi Networks list in the WiFi connection utility

main window.)

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 284 285

Pas de commentaire

Advanced Wireless Communications MINI PRO Guide de l'utilisateur Page 23