Advanced Wireless Communications MINI PRO Guide de l'utilisateur télécharger pdf (Page 41)

AP Signal Strength

The strength of the signal received from the access

point, at the adapter. This value is given in milliwatts

(mW) and may actually be in the picowatts range. This

value varies, based on the distance between the AP

and the adapter, obstacles that may interfere with the

signal, and the power level at which the AP is

transmitting.

NOTE: This parameter is only visible when connected

to a Cisco Systems access point.

AP Noise Level

The radio frequency (RF) noise level present in the

environment that will tend to interfere with the signal

from the access point. RF noise comes from natural

and electrical sources.

NOTE: This parameter is only visible when connected

to a Cisco Systems access point.

Repair

Renews the IP Address. If you have trouble accessing

the network, verify if the IP address is valid. If it is

0.0.0.0 or 169.x.x.x then it is probably not valid. If

your network is set up for automatic network address

assignment, then click Repair and request a new IP

address.

Closes the page.

Help?

Provides help information for this page.

Back to Contents

Trademarks and Disclaimers

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 284 285

Pas de commentaire

Advanced Wireless Communications MINI PRO Guide de l'utilisateur Page 41